Leap Motion Unplugged Plug anytime

[wtfteddy]

Hello first sorry for my bad english today i become my leap motion download the software installed all install the driver but is anytime unplugged plug unplugged plug the software and the leap motion blinking green.
Try it on all USB Slot Alone Unplugged all other Device.

I use the software 2.2.6 and the firmeware 1.7.0. In the Device-Manager i have one Yellow " ! " by SM-Bus-Controller.
Try to find Drives but he dont find it.

I hope anyone can help me

Edit this is the Log:
[20:17:16] [Critical] Unhandled exception: Could not open a detected WinUSB device Error code (80070002)
[20:17:16] [Info] Initializing WinUSB
[20:17:16] [Info] Initialized WinUSB
[20:17:16] [Info] Leap Motion Controller detected: *****
[20:17:16] [Info] Tracking resumed
[20:17:16] [Info] Firmware is up to date.
[20:17:16] [Info] Tracking paused
[20:17:16] [Info] Tearing down WinUSB
[20:17:16] [Info] Leap Motion Controller disconnected: *****
[20:17:17] [Info] Initializing WinUSB
[20:17:17] [Info] Initialized WinUSB
[20:17:17] [Info] Leap Motion Controller detected: *****
[20:17:17] [Info] Tracking resumed
[20:17:17] [Info] Firmware is up to date.
[20:17:17] [Critical] An unhandled exception occurred in a device context: Control communications failure with an attached device Error code (8007001f)
[20:17:17] [Info] Tracking paused
[20:17:17] [Info] Tearing down WinUSB
[20:17:17] [Info] Leap Motion Controller disconnected: ****
[20:17:17] [Info] Initializing WinUSB
[20:17:17] [Info] Initialized WinUSB
[20:17:17] [Critical] An unhandled exception occurred in a device context: Control communications failure with an attached device Error code (80070002)
[20:17:17] [Critical] Unhandled exception: Control communications failure with an attached device Error code (80070002)
[20:17:17] [Critical] An unhandled exception occurred in a device context: Control communications failure with an attached device Error code (80070002)
[20:17:17] [Info] Tearing down WinUSB

[wtfteddy]

Now i try it i can do it for 1 minute after this the same thing

[jhung]

It sounds like something may be wrong with the USB drivers. Could you try reinstalling them by running dpinst64 in C:\Program Files (x86)\Leap Motion\Core Services\Drivers

If that doesn't work, please try uninstalling and reinstalling the Leap Motion software to see if that helps

[blac56nm]

AM having the same problem and after it shows the unplug plug unplug and i go check the device manger i notice the driver has changed back to unknown USB device (device Descriptor Request Failed) all over again

[jhung]

Try going into the Windows Device manager and uninstall the device. Then try reinstalling the drivers and it should fix the problem

[blac56nm]

Have unistalled and installed the leap motion software as well as to dpinst64 but when i go check the device manager i dont is the drivers none of them

[jhung]

Did you try uninstalling the unknown device in the device manager by right clicking on it?

[blac56nm]

is yours nw working properly?

[blac56nm]

yes i did now i cant find them in the device manager

[jhung]

Another user with a similar issue was able to resolve it by uninstalling the device from the device manager and then reinstalling the Leap Motion software

[blac56nm]

i cantt find the drivers

[jhung]

Once you have uninstalled the device from the device manager, try reinstalling the Leap Motion software from www.leapmotion.com/setup

[ravian0514]

my leap motion is not working fine its connecting and disconnecting again and again. i am attaching pictures of software log. please help me out

[jhung]

This error may be a compatibility issue with the low profile board you're using. Try testing the controller on a normal machine and let me know if you run into the same issue